distortion pedal for acoustic guitar Zvex Vexter Super Hard On Distortion Pedal

distortion pedal for acoustic guitar Zvex Vexter Super Hard On Distortion PedalThis is the perfect preamp pedal. The Crackle Okay volume knob is a negative feedback control styled after classic 60s recording console inputs. (They crackled when adjusted too.) Most vintage guitars suffer from steadily deteriorating magnets in their pickups, since permanent magnets arent really forever. The Super Hard Ons input impedance is so high (>5 Meg) that it refuses any current flow from your pickup maintaining the most magnetic field around

This is the perfect preamp pedal. The “Crackle Okay” volume knob is a negative-feedback control styled after classic 60’s recording console inputs. (They crackled when adjusted too.)

Most vintage guitars suffer from steadily deteriorating magnets in their pickups, since permanent magnets aren’t really forever. The Super Hard-On’s input impedance is so high (>5 Meg) that it refuses any current flow from your pickup... maintaining the most magnetic field around each string, so you can hear exactly what your pickup sounded like the day it came off the winder.

The output level can exceed 8 volts peak, and when it finally distorts, the wave is shaped like triode overload, not fuzz.

It’s so transparent no one will be able to tell you’re using a pedal. Perfect for making the most of a classic amp and guitar, because it simply makes your guitar bigger and pushes the amp harder, causing natural overload. This sound can be the solution to the ‘disappearing guitar’ effect you get sometimes on stage when you stomp on your distortion and sound weaker. When cranked, it sounds much louder than a fuzz or distortion under stage conditions.

The SHO’s input jack contains the battery switch. Please unplug from this jack to preserve battery life. NOTE: After plugging in your pedal turn it on and off a few times to equalize the voltages between your guitar, other pedals, your amp, and the SHO. Otherwise you may hear a “POP!” when you turn on your SHO during a gig. If you adjust the boost level, you may hear a “POP!” when switching too. It goes away after a few switches.